The ultimate in car protection by X-Rust
While we are known for our electrical and aircon products we are also a supplier of the fantastic X-Rust range of products https://braidandco.com/portfolio/x-rust/. First up we are going to show you the ultimate in car and motorcycle protection. The car or bike vault will protect your car from water, sun, dust, dirt and corrosion.
Unlike standard car covers the car vault is a bag, covering the entire car including the floor.

The car vault bag also comes with Zerust proprietary vapor corrosion inhibitors moulded into the plastic thereby protecting mechanical and electrical components from corrosion for up to 5 years from the date of purchase.
Key features include:
1. Water resistant
2. UV stable
3. Mould proof
4. Dust proof
5. Protection from corrosion for 5 years
Also suitable for use on restoration projects. The car vault will slow down or stop the rate of corrosion and “hold” the car in its current state until restoration can commence.
We can also protect your bike!

If you love your bike then bag it!
The ultimate in bike protection the motorcycle bag also comes with Zerust proprietary vapor corrosion inhibitors moulded into the plastic thereby protecting from corrosion for up to 5 years.
Key features include:
1. Water resistant
2. UV stable
3. Mould proof
4. Dust proof
5. Protection from corrosion for 5 years
Also suitable for use on restoration projects. The motorcycle bag will slow down or stop the rate of corrosion and “hold” the bike in its current state until restoration can commence.
If it is underbody, rust and corrosion protection you are looking for then the X-Rust underbody coating is what you need!

For cars, trucks, motorbikes, machinery and trailers the underbody coating protects for up to 3 years from moisture, salt and humidity.
Easily applied it can be sprayed over the entire underbody including exhaust systems without affecting hoses, belts or electrical components. Can also be applied down box sections.

Features
- clear finish so you can see what’s going on underneath;
- quick drying (10-15 minutes in ambient air)
- high chip resistance so protects the underlying paint;
- strong corrosion protection for up to 3 years with high salt resistance;
- excellent adhesion on metals, primers and painted surfaces;
- water based and biodegradable
- high temperature resistance so can be used to protect exhaust systems without causing smoke or odours

How to Use
- Remove excess dirt or other contaminants before applying. The cleaner the surface the better the end result. Wash, rinse and dry the vehicle before applying;
- The ideal surface temperature for application is between 15 to 27 degrees Celsius. DO NOT spray on to a hot engine or exhaust, allow to cool;
- Place the sealed 1L bottle in a bucket of hot water. This will make the product more viscous and easier to spray as well as providing better coverage. DO NOT dilute with water;
- Open the bottle allowing air in to the bottle, reseal and shake/tip upside down to mix.
- Use an airless spray system with a a pressure of 1,000 to 2,000 PSI for application. These are professional spray paint units and can be rented from Coates Hire, Kennards and others.
- Keep a constant distance of 20 to 25 cm from the nozzle to the surface being sprayed. Move the spray gun parallel to the area being sprayed whilst holding the spray gun perpendicular to the surface. Spray an area of less than 1.8 m across at any one time. Only ONE spray pass is needed to achieve the proper wet film thickness of between 125 to 250 microns;
- Over spray can be removed with a damp cloth whilst the coating is wet;
- Drying time is 10 to 15 minutes in ambient air or 1 to 3 minutes in an air oven;
- Once the coating is dry inspect to ensure the coating application is consistent.
Product does not contain silicone.
Coverage
A one litre bottle will cover 8 square metres based on a 125 micron wet film thickness (25 micron dry film thickness).
If you would like to know more about these products or the range of other products from X-Rust head to our contacts page and give us a call or send us an email.
Leave a Reply